As an Amazon Associate I earn from qualifying purchases.
My dayplanner wishlist makes that list even longer- I would love to have a readymade chore list right in my planner (organization = higher productivity for this girl), I have all sorts of blog categories (projects, posts, FB, twitter and ideas) that I’d love to have a space for, and labeled “Idea” pages in the back would also be nice. Oh, and, I’d love if it were pretty too.
I’m sure you’ve already surmised that my ideal blog planner does not exist. And it’s pretty important to me, so DIYing my own was pretty high on my priority list this winter.
In fact, just glimpsing my DIYed dayplanner in my purse makes me smile. When I open it up and find my lists of daily chores, space for my blog planning, idea pages AND all of my dayplanner requirements all between two covers, it makes me a little bit giddy. I might even call this dayplanner gloriousness- that’s how much I love this thing.
Even better, I modified an existing, Target-bought journal for this project (cutting out several of the more labor-intensive steps of book making). Which means, of course, that you can make your own blog planner/day planner as well (tailored to your own requirement/wishlists). YAY!
This first ‘how to make your own planner’ post will cover making the contents of the planner itself, though the steps will be different depending on what you design for yourself.
*Sidenote- if you don’t want to design your own system, I love these fabulous printable planner inserts by I Heart Organizing. Those would work as an already-existing option.
You should probably buy your journal/hardbound book before you start designing (so that you can tailor your sizing). I did this part backwards (designed first, bought the journal second) and it worked fine, but it’d probably be smarter to do it the other way around.
After you design (or buy) the contents of your planner, print everything out on your home printer or at a printshop (like Kinko’s). My planner pages are all on half sheets of paper, and there was definitely some trial and error as I tried to figure out the front-to-back printing system (I can send you what I finally determined to work if you’re using half sheets with two days per page like I did).
Next, stack your printed pages in order and separate into six equal sections (two month segments). Put a same sized piece of cardstock in the front and the back. Clip together with paper clips of clamps.
Use a piece of cardboard to make a binding template. Measure out equally spaced holes (five worked well for me), draw guide ‘dots’ and use a drill with a small bit to drill through those holes (use a scrap piece of wood underneath your drilling).
Then, use your template to drill holes into your six sections of paper (as well as your front and back pieces of cardstock). Make sure you line up your template exactly the same each time (I lined mine up with the top edge of the stack of paper and clamped in place). Using the template will ensure uniformity of hole spacing.
Alternate tying off holes by section (so that there isn’t one especially bulky spot in the finished stack) and bind all six sections by passing thread/floss through the alternating middle holes. Then bind all six sections together in one big stack through the top and bottom holes. Pull the binding string taut, but not so tight that the papers begin to fold and pucker.
Once the sections are all bound together at the top and bottom, go back and bind through the middle holes. Everything should be lined up and pulled together at this point, so binding through all of the sections goes pretty quickly.
Your entire insert is now bound together and ready to be made into a custom 2013 planner…
Once this is finished, finish your blog planner with part 2 of the tutorial.