how to make a reading nook using two wooden palettes (part 1)

·

As an Amazon Associate I earn from qualifying purchases.

how to make a reading nook from palettesI love palette furniture. Actually, I think that I love it for the same reason that I am so intrigued by Anthropologie’s window displays- the idea of taking something that no one wants and turning it into something useful and/or beautiful resonates with me. An ostrich made out of book pages? Lovely! A giant wreath made from old books? Fabulous!

Which leads us to… a reading chair for Burke’s playroom made from a palette and other materials we had on hand! Yes please!

Since the assembly of this little gem was a little… mmmm… involved, I’m going to break this tutorial into several parts. Today, I’ll give the info you need to platform of the ‘chair.’ In part 2, we’ll make and attach the sides of the chair.

To make a palette reading nook yourself, you’ll need:
-2 wooden palettes (check the back of home depot or lowe’s… we asked first…)
-scrap pieces of a 2 x , cut into six squares
-3 rolling casters
-sander and sandpaper
-nails

1. Choose your palette. Three tips for this process-
a- Choose the most sturdy palette you can find
b- Find a palette that is a square
c- Try to find one with slats that are as close together as possible.
Sand down the palette to the raw wood. Then draw a diagonal line from one corner to the other corner with a pencil.  
*Note- The palette we used had a broken slat. We just used the side without the broken slat for the chair.

2. Cut along this line. We actually used a circular saw to cut along the diagonal line on one side of the palette, flipped the palette over and cut along the same line on the other side of the palette.

3. Reinforce your ‘front’ edge. Use leftover wood from the side of the palette you discarded (there’s already a piece of wood wedged in between the top and bottom layer of the palette, so use that piece since it is already the right size) to place an extra reinforcing piece on each side of the middle board, sandwiched between the top and bottom layers. Nail your reinforcement pieces in place.

4. On the bottom side of your platform, build up all three corners with squares of scrap wood. These will make your chair sit higher off the ground. Attach the casters to each corner ‘tower.’ Flip over and admire! You’re done with part 1.

Remember, this is what you’re making-

Go here for part 2…

Similar Posts

167 Comments

  1. I really, really like this. My husband and I always say we will try "palette furniture" but it seems too daunting. Your tutorial made it look easy! 🙂

  2. @eva
    The cup is Orla Kiely… I got it at Target last year sometime. 🙂 I'm sure you can find one on ebay, etc.

  3. @eva
    The cup is Orla Kiely… I got it at Target last year sometime. 🙂 I'm sure you can find one on ebay, etc.

  4. Wow! awesome!! I do also like working with palettes (if you have a minute have a look at macarenabilbao.blogspot.com) but I've never seen such an original idea, in corner! congratulations

  5. This is TOO cute!!! So happy to have found your blog (Layla P. tweeted this post 🙂 Will be stopping by often…lots of great inspiration for me here…

  6. I think this is really awesome! I love pallets, although I asked the home depot around here and they have to send them back.

    1. Hey Nicole- here’s the link to part 1- http://www.kojo-designs.com/2010/12/kojotutorial-reading-chair-made-from-two-wooden-palettes-part-2/. I’ll update it in the tutorial as well. 🙂
      Send over pictures if you make one, ok? I’d love to see your take on it.
      ps- I never made a tutorial for making the cushion. Essentially, you make foam triangles to fit in the nook and sew a triangular cover. I used egg crates for the foam (the mattress topper kind) and a sheet for the cover. Fingers crossed that I get to an actual tutorial someday. 🙂

    1. Hey Stephanie! I used foam, cut into a triangle and doubled over. Then I made a cover using sheets.
      Hopefully that helps!

Leave a Reply

Your email address will not be published. Required fields are marked *