As an Amazon Associate I earn from qualifying purchases.
Y’all are going to be so excited about our guest blogger today- we’ve loved Homemade by Jill since we discovered her fantastic blog about a year ago. Head on over to check out some fabulous tutorials for baby stuff (the wipes cases I made last month followed her tutorial), maternity wear how-to’s (seriously, I LOVE the pencil skirt [shown above] I made using Jill’s tutorial– if you’re pregnant, you need one!), party ideas (check out her tips for making the Martha pom poms) and all sorts of other goodness! And she’s here with us today as part of a maternity blog swap- how lucky are we! Without further ado, here’s Jill:
Hi there – I’m Jill from the blog Homemade by Jill, and I’m so happy to be posting here today. Congratulations to Kirstin on the beautiful new addition to her family. Piper Jane is just lovely!
Way back in June, Kirstin and I decided to do a maternity blog swap – she would post for me shortly after my baby Ruby was born in July, and I would post for her in August. So here I am … and although it is a huge challenge to find time to sew, I am so glad I had this commitment. It really got me excited about sewing again!
This tutorial is in response to Kirstin’s lament that there are not enough options when it comes to newborn clothing bottoms (pants, skirts, etc.). Since she liked my maternity pencil skirt tutorial, I thought I’d modify it for baby wear – maybe it will be Piper’s favorite as well!
So without futher ado…
- an old pair of jeans
- an old t-shirt
- basic sewing supplies
*The measurements in this tutorial make a skirt to fit my 13 lb. baby – approximately 3-6 month size. It can easily be modified for smaller or larger sizes.
Make a Denim Tube
- Cut two pieces of denim, 6 1/2 inches x 13 1/2 inches. If you do not have a serger and will need to double fold the hem of the skirt, you may want to add additional length.
- With right sides facing together, sew down the short sides with a 1/4 inch seam, creating a wide tube. I also serged my seams.
- Turn right side out and press your seam. I chose to serge the top and bottom of the tube at this point (optional).
Make a Jersey Tube
- Cut two pieces of stretchy t-shirt fabric, 5 inches x 7 inches (make sure it stretches across the width).
- With right sides facing together, sew down the short sides with a 1/4 inch seam.
- Fold the tube down on itself, so the seams are inclosed. The top edge should be folded and the bottom will be the unfinished edges. This is the skirt’s waistband.
To gather the skirt I created a centered box pleat with a single pleat to each side. Each of the pleats were about 1/2 inch wide, and the side pleats were approximately two inches off the center pleat. Pin the pleats in place and sew a 1/4 inch seam across the top to secure. You could also gather the fabric using a ruffling technique. Either way, you want the gathered panel to measure approximately 9 inches across. Repeat on the back side.
Attach the Waistband
- Place your denim skirt inside the knit tube, lining up the waist of the skirt with the cut edges of the tube. You will have three layers of fabric here.
- Pin in place on the sides, the front middle and back middle (4 pins total). The knit tube will be smaller than the waist of the skirt, but you will stretch it as you sew.
- Using a zig zag stitch, sew around the entire waistband, stretching the knit tube to fit as you go. Double stitch for extra strength. I also finished off this seam on my serger.
- Fold the hem of the skirt under and hem using a 1/4 inch seam (or you could do a blind hem stitch if you want to hide the seam)
- Press your seams, and you’re done!
Find your cutest tiny model, and enjoy the fruits of your labor.
Kirstin, I hope this helps with your clothing dilemma. Congratulations again!